|
Ground Net
A very inexpensive mod that can potentially add greater
throttle response and cure hesitation, is adding additional grounding points to
the cars electrical system. By tying various locations directly to the ground
terminal of the battery it effectively increases the efficiency of the
electrical system.
Tools:
-
10mm socket
-
Wire strippers
-
Connector crimper
Parts needed
-
10 to 15 feet of 8 gauge multi-strand wire, commonly available
at car audio supply stores.
-
Miscellaneous assortment of 8 gauge ring terminals, available
at Radio Shack
Estimated Time Required
Approximately 1/2 hour of labor.
Procedure
1. Disconnect the negative battery terminal.
2. As a general guide and cut desired lengths of 8 gauge wire. Strip the ends of
the wire and crimp the appropriate ring terminals to each end.
3. The locations are the battery ground terminal, the ground the plenum, and the
plenum stud on the front driver side of the plenum. The other location
is a body panel bolt.
4. Install the wire assemblies and reattach the negative battery terminal,
trapping the wire assemblies under either the head of the bolt or the nut.
Pictures will be added at a later date.
| 
